[. . . ] Before plugging in • Make sure your electricity supply is the same as the one shown on the underside of your machine. • This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 4 Know your Kitchen Machine Key Attachment outlets 1 high-speed outlet 2 slow-speed outlet 3 bowl tool socket Optional attachments There are a range of optional attachments available to use with your Kitchen Machine. Com to see the full range and how to buy an attachment not included in your pack. [. . . ] Push the head-lift lever 1 down and raise the mixer head until it locks 2. Note: If the K-beater or Whisk are not picking up ingredients from the bottom of the bowl refer to the “Tool Adjustment” section. Lower the mixer head by pushing the head release lever down 6 and lower the mixer head until it locks 7. Start the machine by turning the speed control 7 to the desired speed setting. After use, return the speed control to ‘O’ OFF position and unplug your Kitchen Machine. Release the tool by turning clockwise to unlock from the tool socket and then remove. 1 Hints • To fully incorporate the ingredients stop mixing and scrape down the bowl with the spatula frequently. € Before whisking egg whites, make sure there is no grease or egg yolk on the whisk or bowl. Points for bread making Important • Never exceed the maximum capacities stated - you may overload the machine. € If you hear the machine labouring, switch off, remove half the dough and do each half separately. Yeast • Dried yeast (the type that needs reconstituting): pour the warm water into the bowl. 8 Using the KAT002ME Adaptor Using the Adaptor 1 Lift off the slow speed outlet cover by pressing the top and lifting off 1. 2 With the adaptor in the position shown (K logo on top), locate to the slow speed outlet and rotate to lock in place 2. € Note: Before attempting to fit an attachment, check inside the adaptor to ensure the locking screw is unwound far enough to allow the attachment to be inserted. 3 Insert the attachment (turning both ways until it locates), then turn the locking screw 3 anti-clockwise to lock in position . 5 Reverse the above procedure to remove the attachment from the adaptor. Cleaning • Always remove the attachment from the adaptor before cleaning the parts. € The adaptor should only be wiped over with a damp cloth and should not be immersed in water. 1 2 3 9 Care & Cleaning • Always switch off and unplug before cleaning. € A little grease may appear at the slow speed outlet 2 when you first use it. € Store excess cord into the cord storage compartment bm at the back of the machine. Bowl • Wash by hand, then dry thoroughly or wash in the dishwasher. [. . . ] 10 Troubleshooting guide Problem The whisk or K-beater knocks against the bottom of the bowl or not reaching the ingredients in the bottom of the bowl. Solution Adjust the height using a suitable spanner – see “Tool Adjustment” section. Twist connection system required (Model KAX) Standby light flashing when Kitchen Machine first plugged in. Attachment must have the KAX twist connection system to fit the outlet. [. . . ]